PTFE 6CN X
Fluoroplastic Resin
Description:
PTFE 6CN Xis apolytetrafluoroethylene fine powder resin used primarily for paste extrusion.
PTFE 6CN Xoffers the excellent combination of properties typical of Teflon fluoroplastic resins.
Typical Applications
PTFE 6CN Xis mainly used for wire and cable insulation and tubes with thin wall tubing, such as spaghetti tubing.
Processing
PTFE 6CN Xis extruded using aliquid processing aid such as naphtha. In the paste extrusion process, the powder is mixed with alubricant aid and then compressed into acylindrical preform slug under light pressure (1.5-2.0 MPa [220-290 psi]). The preform slug is placed in the cylinder of apaste extruder, where the composition is forced under high pressure through afinishing die to produce beading,tubing,or wire coatings. After extrusion,the product is alow-density,but coherent, fibrous structure.
PTFE 6CN Xis usually processed further, with heat, into asolid resin product such as tubing. Heat is applied in two steps, which may be taken in-line with extrusion or separately. The lubricant must be removed first, usually by heating within the range of 100-300 °C (212- 572 °F). Asintering step follows to melt the resin above its melting point of approximately 342 °C (648 °F) and produce the void-free, solid PTFE resin.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.
